Alber e-fix Bedienungsanleitung PDF herunterladen (Seite 9)

2. Wheels

2.1 Mounting wheels

The two electrically powered drive wheels are the heart of the e-fix. They can be

exchanged for the manually operated wheels that are a standard feature of your wheel-

chair. Lift the wheelchair slightly.

· Remove the left wheel of your wheelchair according to the manufacturer’s user manual.

· Press the release cover [1] of the e-fix wheel and simultaneously turn the coupling

ring [2] counter clockwise as far as it will go. “

X“ is then displayed in the window

[46].

· Push the quick-release axle [3] of the e-fix wheel approximately halfway into the

wheel mount attached to your wheelchair [5].

· Turn the e-fix wheel until the torque plug [4] and the torque socket [6] are opposite

one another.

· Push the e-fix wheel

completely into the wheel mount [5] and ensure that the torque

plug [4] is simultaneously pushed into the torque socket [6].

· The release cover [1] of the wheel is still pressed in. Turn the coupling ring [2]

clockwise until it reaches the middle stop.

· When the middle stop is reached (“1“ is displayed in the window [46]), the release

cover [1] is flush with the coupling ring [2]. The e-fix wheel is now ready for operation

in power driven mode.

· Repeat all steps for mounting the e-fix wheel on the right side.

As both e-fix wheels are identical, they can be used not only on the left but also on

the right side of your wheelchair.

Before driving, check that both wheels are correctly locked in position (coupling ring

is at the middle stop and release cover flush with coupling ring). Faulty connections

lead to an immediate standstill of the system and are indicated on the display of the

control unit (see Chapter 9.1).

Before mounting the wheels, check that the quick-release axles and the wheel mount

on the wheelchair are clean. Dirt on the quick-release axles may cause the plug-in

connection to jam.

1 2

4 6

3 5

BDA_E25_innen_GB_USA_final.indd 6 10.07.2008 12:06:54 Uhr

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 29 30

Keine Kommentare

Alber e-fix Bedienungsanleitung Seite 9